Role of Potentiation
Abstract
We developed a mathematical model of the glucose control of insulin secretion capable of quantifying βcell function from a physiological meal test. The model includes a static control, i.e., a secretion component that is a function of plasma glucose concentration (the doseresponse function), and a dynamic control, i.e., a secretion component that is proportional to the positive values of the glucose concentration derivative. Furthermore, the doseresponse function is assumed to be modulated by a timevarying potentiation factor. To test the model, nine nondiabetic control subjects and nine type 2 diabetic patients received three standardized mixed meals over a period of 14–15 h. Blood samples were drawn for the measurement of glucose, insulin, and Cpeptide concentration. The doseresponse function, the parameter of the dynamic control, and the potentiation factor were determined by fitting the model to glucose and Cpeptide concentrations. In diabetic patients, the doseresponse function was shifted to the right (glucose concentration at a reference insulin secretion of 300 pmol · min^{−1} · m^{−2} was 11.7 ± 1.1 vs. 7.2 ± 0.7 mmol/l; P < 0.05), and decreased in slope (53 ± 15 vs. 148 ± 38 pmol · min^{−1} · m^{−2} · mmol^{−1} · l; P < 0.05) and the parameter of the dynamic control was decreased (220 ± 67 vs. 908 ± 276 pmol · m^{−2} · mmol^{−1} · l; P < 0.05) compared with the nondiabetic control subjects. Furthermore, potentiation was markedly blunted and delayed: maximum potentiation was observed at the first meal in normal subjects and at the second meal (about 4 h later) in diabetic subjects; the mean time for the potentiation factor was higher (7.1 ± 0.2 vs. 5.9 ± 0.2 h; P < 0.01), and the size of potentiation was reduced (2.6 ± 0.5 vs. 7.2 ± 1.5 fold increase; P < 0.005). In conclusion, our model of insulin secretion extracts multiple indexes of βcell function from a physiological meal test. Use of the model in patients with type 2 diabetes retrieves known defects in insulin secretion but also uncovers new facets of βcell dysfunction.
The study of insulin secretion by modeling received considerable attention in the 1970s, when sophisticated experiments and models were developed (1–3). The application of modeling to clinical research has since been slow, the intravenous glucose test with ad hoc simplified models being the most widely used approach (4).
A new impulse to in vivo modeling of insulin secretion has come from the Cpeptide–based methods (5,6), which have overcome the problem of firstpass hepatic insulin extraction, a potentially confounding factor. The most recent approaches are based on the Cpeptide method, in particular those in which a meal or a meallike test is used to assess βcell function (7–9). In these approaches, however, little of the original model complexity remains, mainly because of the difficulty of estimating complex models from clinical data.
One of the physiological aspects lost to simplified models is potentiation of insulin secretion by repeated glucose stimulation, which is part of the phenomenon known as the StaubTraugott effect (10,11). Potentiation is known to have remarkable importance, and has been considered with great attention in early modeling (1,3). In a recent study in which we modeled insulin secretion during a whole day of free living (12), we recognized that some form of potentiation is necessary to explain the experimental data. We have therefore developed a model of the glucose control of insulin secretion that incorporates the potentiation phenomenon. We have used this model to analyze the role of potentiation in multiplemeal tests in lean subjects and in patients with type 2 diabetes.
RESEARCH DESIGN AND METHODS
Subjects.
Nine healthy male subjects (age 24 ± 1 years, BMI 22 ± 0.5 kg/m^{2}) and nine type 2 diabetic patients (five men and four women, age 58 ± 2 years, BMI 33 ± 1 kg/m^{2}) participated in the study. Diabetes duration was 7 ± 1 years, and HbA_{1c} averaged 9.0 ± 0.5%. Eight patients were treated with oral hypoglycemic agents, one with diet; all medications were discontinued 3 weeks before the study. The subjects were admitted to the hospital 1 or 2 days before the study and consumed their last meal at 7:00 p.m. on the day before the study. On the study day, three meals were served (2,200 kcal in healthy subjects and 1,700 kcal in diabetic patients), of which 25–30% were given as breakfast and the remaining equally divided between the two other meals. Meal composition was 50% carbohydrate, 20% protein, and 30% fat. Breakfast was consumed between 8:00 and 9:00 a.m., lunch 4 h later, and dinner 12 h (healthy subjects) or 10 h (diabetic patients) after breakfast. Blood sampling started before the first meal (time 0) and continued for 14–15 h, for the measurement of plasma glucose, insulin, and Cpeptide concentrations. Written informed consent was obtained from all subjects, and the protocol was approved by the local ethics committee.
Modeling.
The model (Fig. 1) consists of three subunits: a model for fitting the glucose concentration profile, a model describing the relationship between glucose concentration and insulin (or Cpeptide) secretion, and a model of Cpeptide kinetics.
The purpose of the glucose model is to smooth and interpolate glucose concentrations. It is described by the differential equation where G(t) (expressed in mmol/l) is the venous plasma glucose concentration, k = 0.012 min^{−1} is an assigned constant, and R(t) is a function of time, represented in discrete form as a piecewise linear function over 5min intervals. Equation 1 yields a glucose concentration profile continuous in time and its time derivative. Formally, Eq. 1 is a singlecompartment model of glucose kinetics, although in this context it is only used as a method for smoothing glucose concentration.
In the insulin secretion model, insulin secretion [S(t), in pmol/min] is represented as the sum of two components. The first component [S_{g}(t)] expresses a static relationship between insulin secretion and glucose concentration, i.e., it embodies a βcell doseresponse function. This doseresponse function is not timeinvariant, however, but is modulated by a timevarying factor, expressing a potentiation effect upon insulin secretion: where Q(t) is a function of time, represented in discrete form as a piecewise linear function as R(t) with zero mean over the experimental time period, and f(G) is the doseresponse function. The factor P(t) = e^{Q}^{(t)} is denoted as potentiation factor: it is greater than 1 if Q(t) is above average, and less than 1 if Q(t) is below average.
The βcell doseresponse function f(G) has a formally complex expression (Appendix A) but is characterized by the following simple properties: 1) f(G) is positive for G > 0; 2) f(G) is quasilinear for G below or above a given glucose threshold; 3) the transition between the two quasilinear portions can be both smooth or sharp. f(G) is determined by four parameters: the initial and final slopes (p_{3} and p_{4}, see Appendix A), the threshold glucose level at which the change in slope occurs (p_{2}), and a parameter determining the smoothness of the change (p_{1}). This doseresponse function has been designed on the basis of our previous analysis (12), in which we have shown that a linear doseresponse function is generally sufficient, but in some subjects a change in slope, more or less gradual, must be incorporated. The present doseresponse function overcomes the problem of negative f(G) values of the previous formulation, although it still has the drawback that some parameters (curvature and threshold) are not well identified when the actual doseresponse function is virtually linear in the range of the observed glucose concentrations. Even in this case, however, the doseresponse function is welldefined, as curvature and threshold have little influence on f(G) when f(G) is quasilinear.
The doseresponse function is modified during the experiment by the potentiation factor P(t) (Eq. 2). We define the average doseresponse as that corresponding to the average P(t) in the entire experiment (which is close to 1, as Q(t) is 0 on average).
The second insulin secretion component [S_{d}(t)] represents a dynamic dependence of insulin secretion on the rate of change of glucose concentration. S_{d}(t) is proportional to the derivative of glucose concentration when the derivative is positive, and is 0 otherwise:
Total insulin secretion is the sum of the two components described above:
Total insulin secretion is calculated every 5 min. Total insulin secretion is not dependent on the specific model presented here, because it is equivalent to insulin secretion as calculated by the Cpeptide deconvolution method of Van Cauter et al. (6).
The model for Cpeptide kinetics is the twoexponential model proposed by Van Cauter et al. (6), in which the model parameters are determined in each individual on the basis of the subject’s sex, weight, height, and age. Plasma Cpeptide concentration [C(t)] is the convolution product of the individualized, twoexponential Cpeptide impulse response h(t) and Cpeptide secretion, S(t) (Eq. 4): where ⊗ denotes convolution.
The model resulting from the combination of Eqs. 1–5 embodies three differential equations (Eq. 1 for glucose and two differential equations for the Cpeptide model). The model predicts glucose and Cpeptide concentration once the parameters of f(G) and p_{d}, R(t) (Eq. 1), and Q(t) (Eq. 2) are known. Conversely, the parameters of f(G), p_{d}, R(t), and Q(t) can be estimated using leastsquares techniques from the glucose and Cpeptide data. For this purpose, it is necessary to introduce regularization constraints on R(t) and Q(t), as done in deconvolution schemes. The regularization method used adds penalty terms for R(t) and Q(t) to the standard sum of squares term, which eliminate the spurious oscillations that R(t) and Q(t) would otherwise exhibit. The function that the leastsquares algorithm actually minimizes is where the sums are over all time points, the hat denotes the model prediction, the double quote is the second derivative with respect to time, and the w’s are weights. In Eq. 6, the first two terms are the standard weighted sums of squares for glucose and Cpeptide, the third and fourth term are the regularization terms based on the second derivatives of R(t) and Q(t), which are normally employed in deconvolution algorithms, and the last term is the sum of Q(t) squared.
The weights of the first two standard leastsquares terms, w_{G}(t) and w_{C}(t), were set to the inverse of the expected standard deviation of the measurement error for glucose and Cpeptide concentration. For glucose, the standard deviation was assumed to be constant and equal to 2% of the mean glucose concentration for each individual experiment. For Cpeptide, the measurement error was experimentally found to be concentration dependent and was estimated for each point with the formula: SD = 0.0214 × C + 10, where SD and C are in pmol/l. The weights w_{R} and w_{Q} determine the degree of smoothness of R(t) and Q(t): high weights give smoother R(t) and Q(t). The weight w_{0} constrains Q(t) to be small in a leastsquare sense. This additional constraint has little importance when the secretion rate is clearly correlated with the glycemic excursions. When this correlation is weaker, it may happen that the changes in insulin secretion are accounted for by the potentiation factor P(t) rather than the dose response f(G). In these situations, the last term of Eq. 6 helps to explain as much as possible the secretion changes with glycemic excursions rather than with the potentiation factor P(t). These weights were iteratively selected so that the standard deviation of glucose and Cpeptide concentrations calculated from the difference between the observed and the modelpredicted values are close to the values expected from the measurement error. Model simulation and parameter estimation by minimization of Eq. 6 was performed using the language of technical computing, Matlab.
To illustrate the role of the various secretion components, total insulin secretion is split into three terms according to Eqs. 2 and 4: where P̄ is the mean value of P(t) during the experiment. In Eq. 7, the first component S_{d}(t) is the dynamic component, the second component S_{s}(t) is a static component obtained from the average doseresponse function (i.e., without potentiation), and the third component S_{p}(t) is the potentiation component. S_{p}(t) is a fictitious component expressing the deviation of the actual secretion S(t) from that predicted by S_{d}(t) and S_{s}(t) and can be either positive or negative.
Insulin secretion parameters were normalized to body surface area. From the estimated model parameters, other parameters describing βcell function were calculated. From the doseresponse function, the insulin secretion value corresponding to a fixed reference glucose concentration value (e.g., 5 mmol/l) was calculated. The slope of the doseresponse function at this glucose concentration was also determined. This parameter quantifies βcell sensitivity to glucose concentration changes in the vicinity of the reference glucose value. In the present series of subjects, comparison of insulin secretion at a fixed glucose concentration between control and diabetic subjects is not reliable because the two groups had very different glucose levels. Comparison was thus made between the glucose levels corresponding to a fixed (300 pmol · min^{−1} · m^{−2}) insulin secretion.
To quantify the excursion and the time distribution of the potentiation factor, the ratio between its maximum and minimum value and its mean time were calculated. The mean time is the integral over the first 14 h of the product between time and the potentiation factor, divided by the integral of the potentiation factor during the same period. The mean time is the center of gravity of the potentiation factor curve.
Statistical analysis.
Data and results are presented as mean ± SE. The statistical significance of differences between groups was assessed with the MannWhitney U test.
RESULTS
Glucose and Cpeptide concentrations are shown in Fig. 2 together with the model fit. The existence of potentiation is evident from the data of Fig. 2: in the diabetic subjects, for instance, the second Cpeptide peak is similar to the first in the face of a lower glucose peak.
Figure 3 shows the components of insulin secretion as calculated by Eq. 7. The figure clearly shows that, in both groups, insulin secretion is not accurately predicted from the glucose changes when using only the static and the dynamic control. For instance, in control subjects, total insulin secretion is underestimated during the first glucose peak and overestimated during the third glucose peak by the static secretion component. With the inclusion of potentiation, total insulin secretion is accurately predicted. Figure 3 also shows that the static component is the largest, whereas the dynamic and the potentiation components are smaller.
Figure 4 shows the doseresponse functions, calculated for plasma glucose values in the range of those experimentally observed; Table 1 gives the doseresponse parameters. The doseresponse function was virtually linear in 14 of 18 subjects. The slope of the doseresponse function was higher in control than in diabetic subjects. Furthermore, the parameter of the dynamic control (p_{d}) was lower in diabetic subjects.
Figure 5 shows the time course of the potentiation factor. The differences in pattern are remarkable. Whereas in control subjects potentiation rises during the first glucose peak and is responsible for the higher secretory response to the first meal, in diabetic subjects potentiation is much delayed and sustains the secretory response during the second meal. The mean time for the potentiation factor is in fact significantly higher in diabetic subjects (Table 1). Furthermore, in diabetic subjects, the potentiation factor excursion is reduced more than twofold in comparison with nondiabetic subjects (Table 1). Of interest is also that, in control subjects, potentiation follows the first glucose peak, whereas after the third glucose peak, which is comparable to the first in height, potentiation changes only slightly.
DISCUSSION
For a critical evaluation of the results of this work, it is important to review the model characteristics. Building on longstanding concepts of glucose control of insulin secretion and on our own previous experience (12), we modeled a secretion component that is a quasilinear function of plasma glucose concentration and another component that depends on the derivative of glucose concentration. The need for these components has emerged from more recent work using meals or meallike tests (7–9). In our previous work (12) and in the present analysis, we found that these model characteristics are not sufficient to explain the data of repeated meal tests. In particular, an invariant doseresponse function is not compatible with the observed data. As the experimental data show clear evidence of potentiation of insulin secretion—a wellknown phenomenon—we have featured potentiation in the model.
Because it is not likely that in a repeated meal test potentiation is as simple as described in the mechanistic model of Cerasi et al. (3) or the one by Bergman and Urquhart (1), we have chosen a different approach. We have represented the interplay between the static response of the βcells to glucose (the doseresponse function) and potentiation in a form derived from Cerasi et al. (3), i.e., as the product of the doseresponse function and the exponential function of a variable [Q(t) in our notation] representing potentiation. However, in the model of Cerasi et al., potentiation is related to glucose concentration by a set of differential equations, whereas in our model Q(t) is an estimated function of time, constrained to be smooth but with no a priori determined relationship with glucose. Although this choice has some limitations (see below), it has the essential advantage of being independent of specific assumptions on the mechanisms of potentiation. In fact, in our analysis, the potentiation pattern turns out to be not as simply related to glucose concentration as presupposed by the model of Cerasi et al. This is evident, for instance, in control subjects. The model of Cerasi et al. could explain the onset of potentiation during the first meal. However, because potentiation in the last meal is totally different from that in the first meal despite similar glucose excursions, the same model could not explain both meals.
During the first meal, the potentiation pattern is such that it determines an increase in total insulin secretion when glucose concentration falls compared with the period during which it rises. This phenomenon has also been interpreted as a time delay of insulin secretion with respect to glucose concentration (8,9), following a paradigm proposed by Licko (13). The existence of a delay cannot be excluded. The mathematical representation of the delay used in Breda et al. (8), Toffolo et al. (9), and Licko (13), however, does not appear to be adequate to explain our experimental data, because different delays would be necessary to explain the first and the last insulin secretion peak. Our analysis thus supports the concept that the apparent delay, when observed, is in reality a potentiation phenomenon. This is in accord with classical perfused pancreas experiments [e.g. (1)], which clearly show that during a squarewave glucose stimulation the onset and the offset of insulin secretion (not considering the initial peak) are not symmetrical (as the proposed delay model would predict).
One limitation of our model is that the separation between the contribution of the doseresponse function f(G) and the potentiation factor P(t) to total insulin secretion rests on the smoothness constraints imposed on the potentiation factor, because with no constraints on P(t), Eq. 2 has multiple solutions. The logic of this choice is that as much as possible of the insulin secretion changes should be linked with the glucose changes through f(G), leaving it to P(t) to explain the secretion changes that cannot be accounted for by f(G). If the true insulin secretion were a quasilinear function of glucose concentration like f(G) (i.e., without potentiation), then our approach would yield the correct f(G), and P(t) would equal 1 (because it is for this solution that the regularization terms of Eq. 6 are minimal, i.e., zero). On the other hand, in those cases in which total insulin secretion does not appear to be clearly related to glucose concentration, the estimation of the doseresponse function and the potentiation factor are less precise. The present results, however, indicate that both the doseresponse function and the potentiation factor are generally well determined. On average, in both subject groups, the quantitatively dominant secretory component is the static component, whereas potentiation accounts for the evident changes in the dose response during the experiment (Fig. 3). The doseresponse functions are clearly separated between groups (Fig. 4). In addition, the coefficient of variation of dose response within each group, which includes the variance of the estimation error, is not very different from that calculated in previous studies in which the dose response was directly assessed (14), suggesting that the estimation error has an acceptable variance.
Another limitation of our approach is that the potentiation factor does not include only true potentiation, but also secretory phenomena that may exist but are not explicitly represented in the model, such as circadian rhythms or pulsatility. This makes the physiological interpretation of the potentiation factor more complex.
The obvious advantage of the present analysis for clinical investigation is that it allows calculation of the βcell doseresponse function from a meal test, which is simpler and more physiological than performing complex formats of glucose infusion. Furthermore, it does feature potentiation, which is a well known but not much explored phenomenon.
When the doseresponse functions are compared, our analysis confirms that βcell function is markedly impaired in diabetes. Our results also show, in accord with expectation, that the coefficient of the dynamic insulin secretion component, which is an index of earlyphase insulin secretion, is reduced in diabetes.
New findings are those concerning the potentiation factor. We show that potentiation, broadly defined as a change in the relationship between glucose concentration and insulin secretion, plays a differential role in euglycemic and hyperglycemic conditions. In particular, in diabetic subjects, potentiation is markedly blunted, and its onset is much delayed. The sharp potentiation peak observed in control subjects at the first meal is missing in diabetic subjects, and potentiation reaches its maximum only 5–6 h after the first meal. The current data cannot elucidate the mechanisms underlying this difference, as several factors may have affected the βcell response (e.g., repeated exposure to glucose, enteroinsular factors, regulatory hormones, nonglucose secretagogues). Differences in age, physical fitness, BMI, and total caloric intake (but not meal composition, which was the same in the two groups) may also have played some role. However, a blunted and delayed potentiation in type 2 and gestational diabetes has been reported previously (15,16). Our study thus confirms this finding and quantifies it. Furthermore, it shows that this defect is distinct from the other secretory defects, i.e., the rightward shift in the doseresponse function and the depressed dynamic component. In patients with diabetes, an impaired firstphase insulin response is reputed to feed forward on the subsequent regulatory response to hyperglycemia. This analysis shows also that the lack of a sufficient potentiation response may contribute substantially to the delayed regulatory response.
In summary, in its current formulation, our model of insulin secretion extracts multiple indexes of βcell function from a physiological meal test. These indexes are the doseresponse function relating insulin secretion to glucose concentration, and a parameter expressing the ability of glucose concentration changes to stimulate insulin secretion. In addition, for multiple meal tests, the model yields the time course of a factor representing potentiation of insulin secretion. Testing the model in normotolerant subjects and diabetic patients appears to retrieve known defects in insulin secretion but also to uncover new facets of βcell dysfunction.
APPENDIX A
The doseresponse function f(G) is described by the equation
It can be verified by standard techniques that 1) f(0) = 0 and f(G) > 0 for G > 0; 2) p_{2} is the glucose level at which the slope of f(G) changes from the initial value p_{3} to the final value p_{4}; 3) p_{1} determines the curvature of the function around the threshold glucose level p_{2}: if p_{1} is high (e.g., 10 for the current glucose levels in mmol/l), the transition from the initial slope p_{3} to the final slope p_{4} is brisk; if p_{1} is low (e.g., 0.1), the transition is gradual. The equation for f(G) is derived assuming that the slope of f(G) is a sigmoid function represented by a hyperbolic tangent, i.e., the slope changes more or less rapidly between nearconstant values.
Acknowledgments
We are indebted to the Institut de Recherches Internationales Servier (Courbevoie, France) for providing the data on which our analysis is based and a research grant in partial support of the work. Further financial support was provided through a grant from the project “Mathematical methods and models for the study of biological phenomena” of the Italian National Research Council.
Footnotes

Address correspondence and reprint requests to[email protected].
Accepted for publication 21 June 2001.
A.M. and E.F. have received grant support from the Institut de Recherches Internationales Servier, Courbevoie, France.
The symposium and the publication of this article have been made possible by an unrestricted educational grant from Servier, Paris.